China 3inches Helical Rotor Solar Pump, Water Pump, Pupming Pump, Vacuum Pump with high quality

Product Description

3inches Helical rotor photo voltaic pump,h2o pump,pupming pump,vacuum pump (3 Years Warranty)

 

( 3 ~ 6 Inches Submersible & Surface area Solar Pump, solar h2o pump )

Top High quality Submersible Photo voltaic Drinking water Pump for 3inches and 4inches

Solar panels  is to  convert daylight into electrical strength which will be passed to the photo voltaic pump controller,the vitality will be employed to electrical power the pump. 
Solar Controller /Inverte is used to stabilize the electricity voltage and output the energy to drive the electric motor of the pump. If backup batteries (optional) are offered, then the pump controller can demand them.
Battery is for Storaging the extra  energy that can be utilized at later time when the sunlight might not be ample to travel the pump.
H2o Amount detector / Sensors is used to linked to the controller and can be utilized to protect the pump from working dry as nicely as to automatically switch the pump off when a water tank is full.

 

SPECIFICATION
1.  Max Head : twenty — 320m
two.  Max Flow : .76 — two hundred m3/hr
3.  Power : .1hp — 100hp
4.  Voltage : 12 V -120V 220V -540V
five.  Motor : DC motor & AC motor
six.  Material : SS304 & SS316
seven. Controller : mppt kind for Automatic restating

Software
1. Irrigation of agriculture
2. Drinking drinking water and living drinking water
3. Backyard garden irrigation
4. Fountains

Features
1. The performance is enhanced 25% by the everlasting magnetism,direct present, brushless, non-sensor motor.
2. Adopt double plastic package deal for rotor and stator,motor insulation ≥300MΩ,the motor stability was much improved.
three. Higher method items adopting MPPT and DSP chip approach.
four. 100% copper wire, chilly-rolled silicon metal sheet.
five. Stainless steel 304 & 316 shaft , motor physique, screw.

NEW Produced Photo voltaic PUMP
1. Restart : Absolutely Automatical restart every Morning , or when the sunshine seems following Cloud
two. Effectiveness : 15-twenty% increased than frequent Controller
three. Safety In opposition to Mistaken Link : Can defend Against being burned , in circumstance some customers Reversed panel “+” and “-” ternmials when relationship to controller
4. High Temperature Resistance : Can operate effectively below 50 levels issue for 24 hours continual working

 

3′ Submersible Solar Pump ( Screw Pump )
 

Product Voltage (V) Power (Kw) Max. Flow    (M³/H) Max.  Head
(m)
Outlet (Inch) Diameter* Size (mm) Excess weight (Kg)
3SPS0.72/twenty-D12/80 12–26 forty five-150 .72 20 G0.seventy five”   6.five
3SPS0.seventy six/28-D12/one hundred twenty twelve–26 120 .seventy six 28 G0.75″   6.7
3SPS0.86/38-D12/one hundred fifty twelve–26 a hundred and fifty .86 38 G0.seventy five”   6.8
3SPS1./30-D24/eighty sixteen-36 45-a hundred and fifty 1 thirty G0.seventy five” seventy six*four hundred seven
3SPS1.3/50-D24/one hundred forty sixteen-36 eighty-200 one.three 50 G0.75″   7.2
3SPS1.8/80-D24/210 sixteen-36 one hundred-270 1.eight eighty G0.75″   seven.5
3SPS1.8/one hundred-D36/270 24-48 one hundred forty-350 1.eight a hundred G0.seventy five”   eight
3SPS1.8/one hundred twenty-D36/500 24-48 320-800 1.8 a hundred and twenty G0.seventy five”   nine
3SPS2.3/a hundred and forty-D48/750 36-72 480-950 2.three a hundred and forty G0.seventy five” 76*460 9
3SPS2.3/160-D72/1000 48-96 600-1200 2.three one hundred sixty G0.seventy five”   9.five
3SPS2.3/180-D72/1300 72-a hundred and forty four 800-1500 two.3 a hundred and eighty G0.75″   nine.5

4′ Submersible Photo voltaic Pump ( Centrifugal Pump )
 

Model Voltage(V) Power(W) Max. Flow   (M³/H) Max.  Head    (m) Outlet (Inch) Diameter* Duration(mm) Weight (Kg)
4SPSC5./28-D24/250 eighteen-26 120-360 five 28 G1.twenty five” 100*540 twelve
4SPSC5.5/38-D36/400 24-48 200-five hundred five.five 38 G1.twenty five” one hundred*650 twelve.5
4SPSC5.5/58-D48/750 36-seventy two 450-900 five.5 fifty eight G1.twenty five” a hundred*680 thirteen.5
4SPSc6./72-D72/a thousand forty eight-ninety six 600-1200 six seventy two G1.twenty five” one hundred*740 15.five
4SPSc6.5/ninety eight-D72/1300 seventy two-one hundred forty four 800-1500 6.5 98 G1.twenty five” one hundred*880 16.five
4SPSC10/thirty-D48/750 36-72 450-900 10 thirty G1.5″ 100*540 thirteen.five
4SPSC10/44-D72/one thousand forty eight-96 600-1200 ten 44 G1.5″ 100*650 fifteen
4SPSC10/fifty seven-D72/1300 72-one hundred forty four 800-1500 ten fifty seven G1.5″ 100*680 15.five
4SPSC15/21-D72/one thousand forty eight-ninety six 600-1200 15 21 G2″ 100*540 13.5
4SPSC15/28-D72/1300 seventy two-144 800-1500 fifteen 28 G2″ 100*620 14

6′ Submersible Solar Pump ( Centrifugal Pump )

Design Impeller  Substance Voltage (V) Energy (KW) Max. Flow    (M³/H) Max.  Head    (m) Outlet (Inch) Diameter* Length (mm) Fat (Kg)
6SPSC23/21-D72/1300 Stainless Metal 304 72-144 800-1500 23 21 G3″ 125*seven hundred 23
6SPSC28/13-D72/1300 seventy two-one hundred forty four 800-1500 28 thirteen G3″ one hundred twenty five*710 24
6SPSC46/7-D72/1300 seventy two-a hundred and forty four 800-1500 forty six seven G4″ one hundred twenty five*690 22

NEW Solar PUMP CONTROLLER SPECIFCATION

Product Controller Voltage Best Working Voltage (vmp variety) Max minimal Voltage (max.Voc)
New mppt Controller 24V seventeen-40V 50V
36V 23-50V 68V
48V 32-63V 78V
72V 48-96V 120V

NEW MPPT Photo voltaic PUMP  ADVANTAGE :

  New MPPT Controller   Bad Good quality Controller on Marketplace
Restart Entirely Routinely restart everying Morning , or when the sunlight appears soon after Cloud V.S . Not continual, and cannot restart Immediately
Effectiveness 15-20% higher than common Controller V.S . Reduce effectiveness
MPPT  Fuction Has mppt fuction V.S . No mppt
Enter Voltage Range Increase significantly greater input voltage assortment to 150V.Will make the panel choice quite simple, also steer clear of as well greater enter voltage burn off the controller V.S . Extremely scaled-down enter voltage selection premier only to 85V, and will be burnt if the panel voltage boosts throughout the quite shinning daytime
Defense In opposition to Improper Link Can defend From getting burned , in situation some consumers Reversed panel “+” and “-” ternmials when connection to controller V.S . No Security, will be Burned Definitely
Large Temperature Resistance Can run effectively beneath 50 degrees issue for 24 hrs continually V.S . Will be burned, if tempreture a lot more than 40 levels
Procedure Quite Practical to Open up the Box to adjust the Pace Swap V.S . Not Hassle-free, wants Screwdriver to open up the 4 bolts each and every time
Warranty 3 Many years V.S . No warranty or longest as 1 year

 

US $10-50
/ Piece
|
1 Piece

(Min. Order)

###

Max.Head: >150m
Max.Capacity: >400 L/min
Driving Type: Motor
Material: Stainless Steel
Structure: Multistage Pump
Assembly: Booster Pump

###

Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model Voltage (V) Power (Kw) Max. Flow    (M³/H) Max.  Head
(m)
Outlet (Inch) Diameter* Length (mm) Weight (Kg)
3SPS0.72/20-D12/80 12–26 45-150 0.72 20 G0.75"   6.5
3SPS0.76/28-D12/120 12–26 120 0.76 28 G0.75"   6.7
3SPS0.86/38-D12/150 12–26 150 0.86 38 G0.75"   6.8
3SPS1.0/30-D24/80 16-36 45-150 1 30 G0.75" 76*400 7
3SPS1.3/50-D24/140 16-36 80-200 1.3 50 G0.75"   7.2
3SPS1.8/80-D24/210 16-36 100-270 1.8 80 G0.75"   7.5
3SPS1.8/100-D36/270 24-48 140-350 1.8 100 G0.75"   8
3SPS1.8/120-D36/500 24-48 320-800 1.8 120 G0.75"   9
3SPS2.3/140-D48/750 36-72 480-950 2.3 140 G0.75" 76*460 9
3SPS2.3/160-D72/1000 48-96 600-1200 2.3 160 G0.75"   9.5
3SPS2.3/180-D72/1300 72-144 800-1500 2.3 180 G0.75"   9.5

###

Model Voltage(V) Power(W) Max. Flow   (M³/H) Max.  Head    (m) Outlet (Inch) Diameter* Length(mm) Weight (Kg)
4SPSC5.0/28-D24/250 18-26 120-360 5 28 G1.25" 100*540 12
4SPSC5.5/38-D36/400 24-48 200-500 5.5 38 G1.25" 100*650 12.5
4SPSC5.5/58-D48/750 36-72 450-900 5.5 58 G1.25" 100*680 13.5
4SPSc6.0/72-D72/1000 48-96 600-1200 6 72 G1.25" 100*740 15.5
4SPSc6.5/98-D72/1300 72-144 800-1500 6.5 98 G1.25" 100*880 16.5
4SPSC10/30-D48/750 36-72 450-900 10 30 G1.5" 100*540 13.5
4SPSC10/44-D72/1000 48-96 600-1200 10 44 G1.5" 100*650 15
4SPSC10/57-D72/1300 72-144 800-1500 10 57 G1.5" 100*680 15.5
4SPSC15/21-D72/1000 48-96 600-1200 15 21 G2" 100*540 13.5
4SPSC15/28-D72/1300 72-144 800-1500 15 28 G2" 100*620 14

###

Model Impeller  Material Voltage (V) Power (KW) Max. Flow    (M³/H) Max.  Head    (m) Outlet (Inch) Diameter* Length (mm) Weight (Kg)
6SPSC23/21-D72/1300 Stainless Steel 304 72-144 800-1500 23 21 G3" 125*700 23
6SPSC28/13-D72/1300 72-144 800-1500 28 13 G3" 125*710 24
6SPSC46/7-D72/1300 72-144 800-1500 46 7 G4" 125*690 22

###

ITEM Controller Voltage Best Working Voltage (vmp range) Max limited Voltage (max.Voc)
New mppt Controller 24V 17-40V 50V
36V 23-50V 68V
48V 32-63V 78V
72V 48-96V 120V

###

  New MPPT Controller   Poor Quality Controller on Market
Restart Totally Automatically restart everying Morning , or when the sun appears after Cloud V.S . Not steady, and cannot restart Automatically
Efficiency 15-20% higher than common Controller V.S . Lower efficiency
MPPT  Fuction Has mppt fuction V.S . No mppt
Input Voltage Range Increase much larger input voltage range to 150V.Will make the panel selection very easy, also avoid too higher input voltage burn the controller V.S . Very smaller input voltage range largest only to 85V, and will be burnt if the panel voltage increases during the very shinning daytime;
Protection Against Wrong Connection Can protect Against being burned , in case some customers Reversed panel "+" and "-" ternmials when connection to controller; V.S . No Protection, will be Burned Definitely
High Temperature Resistance Can run well under 50 degrees condition for 24 hours continually; V.S . Will be burned, if tempreture more than 40 degrees;
Operation Very Convenient to Open the Box to change the SPEED SWITCH; V.S . Not Convenient, needs Screwdriver to open the 4 bolts every time;
Warranty 3 Years V.S . No warranty or longest as 1 year;
US $10-50
/ Piece
|
1 Piece

(Min. Order)

###

Max.Head: >150m
Max.Capacity: >400 L/min
Driving Type: Motor
Material: Stainless Steel
Structure: Multistage Pump
Assembly: Booster Pump

###

Samples:
US$ 10/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model Voltage (V) Power (Kw) Max. Flow    (M³/H) Max.  Head
(m)
Outlet (Inch) Diameter* Length (mm) Weight (Kg)
3SPS0.72/20-D12/80 12–26 45-150 0.72 20 G0.75"   6.5
3SPS0.76/28-D12/120 12–26 120 0.76 28 G0.75"   6.7
3SPS0.86/38-D12/150 12–26 150 0.86 38 G0.75"   6.8
3SPS1.0/30-D24/80 16-36 45-150 1 30 G0.75" 76*400 7
3SPS1.3/50-D24/140 16-36 80-200 1.3 50 G0.75"   7.2
3SPS1.8/80-D24/210 16-36 100-270 1.8 80 G0.75"   7.5
3SPS1.8/100-D36/270 24-48 140-350 1.8 100 G0.75"   8
3SPS1.8/120-D36/500 24-48 320-800 1.8 120 G0.75"   9
3SPS2.3/140-D48/750 36-72 480-950 2.3 140 G0.75" 76*460 9
3SPS2.3/160-D72/1000 48-96 600-1200 2.3 160 G0.75"   9.5
3SPS2.3/180-D72/1300 72-144 800-1500 2.3 180 G0.75"   9.5

###

Model Voltage(V) Power(W) Max. Flow   (M³/H) Max.  Head    (m) Outlet (Inch) Diameter* Length(mm) Weight (Kg)
4SPSC5.0/28-D24/250 18-26 120-360 5 28 G1.25" 100*540 12
4SPSC5.5/38-D36/400 24-48 200-500 5.5 38 G1.25" 100*650 12.5
4SPSC5.5/58-D48/750 36-72 450-900 5.5 58 G1.25" 100*680 13.5
4SPSc6.0/72-D72/1000 48-96 600-1200 6 72 G1.25" 100*740 15.5
4SPSc6.5/98-D72/1300 72-144 800-1500 6.5 98 G1.25" 100*880 16.5
4SPSC10/30-D48/750 36-72 450-900 10 30 G1.5" 100*540 13.5
4SPSC10/44-D72/1000 48-96 600-1200 10 44 G1.5" 100*650 15
4SPSC10/57-D72/1300 72-144 800-1500 10 57 G1.5" 100*680 15.5
4SPSC15/21-D72/1000 48-96 600-1200 15 21 G2" 100*540 13.5
4SPSC15/28-D72/1300 72-144 800-1500 15 28 G2" 100*620 14

###

Model Impeller  Material Voltage (V) Power (KW) Max. Flow    (M³/H) Max.  Head    (m) Outlet (Inch) Diameter* Length (mm) Weight (Kg)
6SPSC23/21-D72/1300 Stainless Steel 304 72-144 800-1500 23 21 G3" 125*700 23
6SPSC28/13-D72/1300 72-144 800-1500 28 13 G3" 125*710 24
6SPSC46/7-D72/1300 72-144 800-1500 46 7 G4" 125*690 22

###

ITEM Controller Voltage Best Working Voltage (vmp range) Max limited Voltage (max.Voc)
New mppt Controller 24V 17-40V 50V
36V 23-50V 68V
48V 32-63V 78V
72V 48-96V 120V

###

  New MPPT Controller   Poor Quality Controller on Market
Restart Totally Automatically restart everying Morning , or when the sun appears after Cloud V.S . Not steady, and cannot restart Automatically
Efficiency 15-20% higher than common Controller V.S . Lower efficiency
MPPT  Fuction Has mppt fuction V.S . No mppt
Input Voltage Range Increase much larger input voltage range to 150V.Will make the panel selection very easy, also avoid too higher input voltage burn the controller V.S . Very smaller input voltage range largest only to 85V, and will be burnt if the panel voltage increases during the very shinning daytime;
Protection Against Wrong Connection Can protect Against being burned , in case some customers Reversed panel "+" and "-" ternmials when connection to controller; V.S . No Protection, will be Burned Definitely
High Temperature Resistance Can run well under 50 degrees condition for 24 hours continually; V.S . Will be burned, if tempreture more than 40 degrees;
Operation Very Convenient to Open the Box to change the SPEED SWITCH; V.S . Not Convenient, needs Screwdriver to open the 4 bolts every time;
Warranty 3 Years V.S . No warranty or longest as 1 year;

What Is a Pulley?

The pulley is a wheel mounted on a shaft or axle. Its purpose is to support the movement of a cable that is taut. This cable transfers power to a shaft. However, there are certain safety precautions that you should follow when using a pulley. Read on to learn more! Listed below are common uses and their main parts. Listed below are some of the benefits of using a pulley.
pulley

Common uses of a pulley

A pulley is a common mechanical device used to increase the force needed to lift a heavy object. Most commonly, these devices are used in construction equipment. These machines use high-tension ropes to transfer heavy objects from one floor to another. Other common uses of a pulley include buckets and flagpoles. These devices are extremely useful in a wide range of applications. To learn more about the common uses of pulleys, keep reading.
A pulley is a wheel with grooves for holding rope. Its purpose is to change the direction and point at which a pulling force acts. It is usually used in sets to reduce the amount of force needed to lift a load, but the work involved is similar. Pulleys are also used in rock climbing devices. For many applications, a pulley is a vital part of construction.
The most common use of a pulley involves hoisting and lowering a flag. Other examples include clotheslines, bird feeders, and escalators. Pulleys are also commonly used on oil derricks. Many other common applications include hoisting and lowering garage doors. Pulley systems are also used in engines and cranes. For more information, check out our interactive pulley diagram!
Pulleys can also be used to lower total work required for a task. In many cases, a pulley will consist of two parts: the pulley hub and the shaft pulley. The hub clamps the shaft pulley, while the pulley itself is connected to the motor or other device. If you’re looking for a pulley, it’s important to learn how it works.
The most common uses for a pulley involve lifting heavy objects, and the mechanism used to lift them is known as a pulley. A pulley is an industrial device that uses two wheels to reduce the force needed to lift a weight. The pulley reduces this force by half by allowing the user to pull on the rope four times as far. The pulley also allows for a smaller lifting distance.

Main parts of a pulley

A pulley consists of the main element of a system. This is typically a cable, rope, belt, or chain. There are two basic types of pulleys – a Driver Pulley and a Follower Pulley. Pulleys are available in small and large sizes. The periphery part of the pulley is called the Face, and the protruding middle part is called the Crown. A pulley’s face can be round, rectangular, or even “V” shaped.
The first pulley was created by the Greek mathematician Archimedes in the third century BCE. These simple machines are made of a rope, an axle, and a wheel. The pulley’s end is attached to a person, object, or motor. These machines can be used in various tasks to lift heavy objects. The pulley is a great mechanical advantage for any lifter.
The ideal mechanical advantage of a pulley is defined by the number of rope segments that pull an object. The higher the number of loops on the rope, the higher the mechanical advantage. The greater the mechanical advantage, the less force is required to move the object. Likewise, the greater the distance the rope traverses, the higher the mechanical advantage of a pulley. There are several different types of pulley, depending on their combination of rope, wheel, and rope.
The basic components of a pulley are the face and hub, and the rope is threaded into the center of the pulley. The pulley is usually made of a rope and can be used to lift heavy weights. It can also be used to apply great force in any direction. Step pulleys have multiple faces, which are fixed in sequence. They can also increase the speed of the driven pulley.
A pulley is a simple machine consisting of a wheel, rope, or chain. These parts are crucial for making moving and lifting easier. Because they change the direction and magnitude of force, they can be a useful tool. Some pulleys even change direction. You can learn more about the pulley by downloading this resource today. The resources are designed to support the new 9-1 GCSEs in Design & Technology and Engineering.
pulley

Mechanical advantage

Pulleys have been used to move heavy objects for centuries. When two rope sections are used, the weight of a 100kg mass can be moved with only 500 newtons of force. Adding an extra pulley increases the mechanical advantage. If the pulley has two wheels, the distance between the rope sections and the wheel grooves is only half the distance, but the mechanical advantage still applies. Adding another pulley increases the mechanical advantage, but can be risky.
Mechanical advantage is the ratio of force used versus force applied. The calculations are made under the assumption that the ropes and weights do not elongate or lose energy due to friction. If the weights are very light, the mechanical advantage is greater than that in the real world. To calculate the mechanical advantage, the weight of the load to be lifted must be the same as the weight of the person using the pulley.
A single moveable pulley has a mechanical advantage of two. The weight passes around the pulley, and one end of the rope is attached to a fixed point. The pulling force is then applied to the other end of the rope. The distance the weight travels doubles, or halved, depending on the direction of the pulley. Adding a second pulley reduces the distance and the effort required to lift it.
There are several ways to calculate the mechanical advantage of a pulley system. Some methods are specific to certain types of systems, while others work for all systems. The T-Method is a good choice in many applications, as it calculates the units of tension for each rope segment. Once you have determined the input force, you need to determine the maximum force that will be applied to each component. A compound pulley, for example, will require 4 units of tension for each rope segment.
In simple terms, the effort is the amount of force needed to lift the load. This force is measured in newtons (N). A mechanical advantage is often presented without units. If the student does not have this unit, you may need to convert the units to newtons, since one kilogram is equal to 10 newtons. If you can’t figure out the units of effort, you can use the KWL chart provided by the teacher.
pulley

Safety precautions

There are a few safety precautions you should take when using a pulley. First, always check the SWL (safe working load) before attaching anything to the pulley. This indicates the maximum weight and angle the pulley can safely handle. Second, make sure that your work area is free from people and debris. Third, wear a hard hat to protect your head from blows and falling objects.
Another important consideration is anchoring. Although the pulley reduces the weight of an object, it is not enough to eliminate the weight. This is especially true if you are hoisting a heavy object, such as a motorcycle or lawnmower. It is important to ensure that the anchoring point can support the entire weight of the load. It is also important to follow proper anchoring procedures when using a pulley to lift a motorcycle or lawnmower.
In addition to the safety latch, you should use a tag line to control the suspended load. Remember that a chain pulley block is necessary for vertical lifting. You should also wear personal protective equipment (PPE) while using a pulley to avoid injuries. If your workplace does not have an PPE policy, you should consider implementing a similar policy. These safety guidelines are a good start.
If you are using a pulley to lift heavy objects, make sure to wear gloves. Those who are not familiar with rope-pulling will have an easier time demonstrating how it works. If you are using a rope-pulley system in a classroom, be sure to follow lab safety guidelines. Wear cloth gloves, clear the area, and do not jerk the rope. In addition, never allow yourself to be pulled into the rope by an unfamiliar person.
Another important safety precaution when using a pulley is to ensure that the anchor point for your system is adequate to support the weight of the object being lifted. Check with the manufacturer of the pulley to find out what its weight limit is, as some types of pulleys are designed to lift much heavier weights than others. It is important to follow all manufacturer’s instructions when using a pulley.

China 3inches Helical Rotor Solar Pump, Water Pump, Pupming Pump, Vacuum Pump     with high quality China 3inches Helical Rotor Solar Pump, Water Pump, Pupming Pump, Vacuum Pump     with high quality
editor by czh 2022-11-28