Product Description

Provide us with the detailed data according to the following drawing for us to quote.

Diameter[D]	No.	Item Code	Groove[N]	Rope Diameter[d]	Groove distance [a]	Inner Diameter [E]	Pulley Width [B1]	Hub  Width [B2]	Speed [m/s]
Φ320	1	NE320001	4	Φ8	12	Φ80-Φ90	60	80	≤2
	2	NE320002				Φ100-Φ110		85	≤2
	3	NE320003				Φ120-Φ130		90	≤2
	4	NE320004	5	Φ8	12	Φ80-Φ90	72	80	≤2
	5	NE320005				Φ100-Φ110		85	≤2
	6	NE320006				Φ120-Φ130		90	≤2
	7	NE320007	6	Φ8	12	Φ80-Φ90	85	80	≤2
	8	NE320008				Φ100-Φ110		85	≤2
	9	NE320009				Φ120-Φ130		90	≤2
Centrifugal polymerization one-piece metal bushing Nylon Pulley of same specification									≤3
1.CZPT can supply standard parts such as Bearing, Shaft, U-bolt, etc according to customers’ requirements. 2.CZPT can produce other Non-standard elavator driving sheave according to customers’  requirements. 3.The above are standard common parameters.Pulley with diameter of Φ320,Φ400,Φ520 and others can also be supplied.     The below diameters of pulley are avaliable:  Φ150/Φ200/Φ220/Φ240/Φ250/Φ260/Φ280  Φ290/Φ300/Φ330/Φ350/Φ360/Φ410/Φ420  Φ440/Φ450/Φ480/Φ500/Φ540/Φ600/Φ640 Scope of application: villa elevator, passenger elevator, cargo elevator,   sightseeing elevator

 

Diameter[D]	No.	Item Code	Groove[N]	Rope Diameter[d]	Groove distance [a]	Inner Diameter [E]	Pulley Width [B1]	Hub  Width [B2]	Speed [m/s]
Φ400	1	NE400001	4	Φ10	14/15/16	Φ100-Φ110	73	85	≤2
	2	NE400002				Φ120-Φ130		90	≤2
	3	NE400003				Φ140		95	≤2
	4	NE400004	5	Φ10	14/15/16	Φ100-Φ110	90	85	≤2
	5	NE400005				Φ120-Φ130		90	≤2
	6	NE400006				Φ140		95	≤2
	7	NE400007	6	Φ10	14/15/16	Φ100-Φ110	105	85	≤2
	8	NE400008				Φ120-Φ130		90	≤2
	9	NE400009				Φ140		95	≤2
	10	NE40571	7	Φ10	14/15/16	Φ140	120	95	≤2
	11	NE400011				Φ150-Φ160		115	≤2
	12	NE400012	8	Φ10	14/15/16	Φ140	137	95	≤2
	13	NE400013				Φ150-Φ160		115	≤2
	14	NE400014	9	Φ10	14/15/16	Φ140	153	115	≤2
	15	NE400015				Φ150-Φ160		115	≤2
Centrifugal polymerization one-piece metal bushing Nylon Pulley of same specification(No.1-9)									≤3
Centrifugal polymerization one-piece metal bushing Nylon Pulley of same specification(No.10-15)									≤4
1.CZPT can supply standard parts such as Bearing, Shaft, U-bolt, etc according to customers’ requirements. 2.CZPT can produce other Non-standard elavator driving sheave according to customers’  requirements. 3.The above are standard common parameters.Pulley with diameter of Φ320,Φ400,Φ520 and others can also be supplied.     The below diameters of pulley are avaliable:  Φ150/Φ200/Φ220/Φ240/Φ250/Φ260/Φ280  Φ290/Φ300/Φ330/Φ350/Φ360/Φ410/Φ420  Φ440/Φ450/Φ480/Φ500/Φ540/Φ600/Φ640 Scope of application: villa elevator, passenger elevator, cargo elevator,   sightseeing elevator

 

Diameter[D]	No.	Item Code	Groove[N]	Rope Diameter[d]	Groove distance [a]	Inner Diameter [E]	Pulley Width [B1]	Hub  Width [B2]	Speed [m/s]
Φ520	1	NE500001	4	Φ10	14/15/16	Φ100-Φ110	73	85	≤2
	2	NE500002				Φ120-Φ130		90	≤2
	3	NE500003				Φ140		95	≤2
	4	NE500004	5	Φ10	14/15/16	Φ100-Φ110	90	85	≤2
	5	NE500005				Φ120-Φ130		90	≤2
	6	NE500006				Φ140		95	≤2
	7	NE500007	6	Φ10	14/15/16	Φ100-Φ110	105	85	≤2
	8	NE500008				Φ120-Φ130		90	≤2
	9	NE500009				Φ140		95	≤2
	10	NE50571	7	Φ10	14/15/16	Φ140	120	95	≤2
	11	NE500011				Φ150-Φ160		115	≤2
	12	NE500012	8	Φ10	14/15/16	Φ140	137	95	≤2
	13	NE500013				Φ150-Φ160		115	≤2
	14	NE500014	9	Φ10	14/15/16	Φ140	153	115	≤2
	15	NE500015				Φ150-Φ160		115	≤2
Centrifugal polymerization one-piece metal bushing Nylon Pulley of same specification(No.1-9)									≤3
Centrifugal polymerization one-piece metal bushing Nylon Pulley of same specification(No.10-15)									≤4
1.CZPT can supply standard parts such as Bearing, Shaft, U-bolt, etc according to customers’ requirements. 2.CZPT can produce other Non-standard elavator driving sheave according to customers’  requirements. 3.The above are standard common parameters.Pulley with diameter of Φ320,Φ400,Φ520 and others can also be supplied.     The below diameters of pulley are avaliable:  Φ150/Φ200/Φ220/Φ240/Φ250/Φ260/Φ280  Φ290/Φ300/Φ330/Φ350/Φ360/Φ410/Φ420  Φ440/Φ450/Φ480/Φ500/Φ540/Φ600/Φ640 Scope of application: villa elevator, passenger elevator, cargo elevator,   sightseeing elevator

FAQ
 

1. Are you manufacturer or trading company?

We are the leading manufacturer in Elevator Pulley field for more than 30 years, integrating R & D, Production and sales as 1 covering an area of 46,620 square meters.
 

2. What material are you using for packing?

We can use cartons or wooden cases to pack the products according our customers’ requirements.
 

3. We methods are you using for shipping?

We can use Sea shipping, Air shipping and Express accordingly. We have long-term cooperation with TNT, FedEx, UPS, EMS and DHL, multiple ways to choose from.
 

4. How can I place an order with you?

The best way is to send us your drawing and our engineer can make a drawing according to our exist mould. If you don’t have a drawing, you can send us your data for the elevator or pulley, we can also make drawing accordingly.
 

5. Do you have any other ways to introduce your company to all over the world?

We also attend exhibitions at home and abroad. Please leave us your contact information and we will send you invitation ahead of time.
 

What is a pulley?

Pulleys are shafts or wheels on a shaft that support the movement and change of direction of a taut cable. The pulley also transfers power from the shaft to the cable. A simple pulley is used to raise the school flag. Read on to learn about the basic types of pulleys. We also covered the use of pulleys in everyday life. Read on to learn more about this important mechanical part.

composite pulley

A composite pulley is a mechanical system where 2 or more pulleys and ropes are connected together. It reduces the force required to lift the load because the force is divided by the distance of each pulley. Distance is equal to the mass of the object. Composite pulleys are a common mechanical system on sailboats. Composite pulleys can be used to lift heavy equipment such as sails.
The compound pulley unit consists of 2 pulleys, 1 fixed and the other movable. The fixed pulley is fixed overhead, while the movable pulley is connected to the load by a chain. The lift applies force to the other end of the rope. Anchor points are attached to fixed joists, ceiling joists or sturdy branches. The chain should be long enough to support the load during lifting.
Composite pulleys can be made from a variety of materials. Some are fixed and remain fixed. Others are detachable. The composite pulley combines the advantages of both types, making it a versatile tool. In the table below, these 3 types of pulleys are compared. It’s easy to see which 1 is best for your needs. The right choice depends on your specific needs and budget.
The compound pulley system consists of 2 fixed pulleys and 1 movable pulley. The compound pulley system multiplies the force by a factor of 2. The compound pulley system is particularly suitable for heavy loads and is ideal for construction sites. Workers apply less than half the load force on the composite pulley, significantly reducing the force required. This is a major benefit for many people.

Fixed pulley

Fixed pulleys are fixed gears of fixed length that are mounted on solid objects. There are many different types of pulley systems. Some cooperate with each other, but not “fixed”.
Fixed pulleys can be used for a variety of purposes. One application is to lift small objects. They have a one-to-1 mechanical advantage. Often, a single pulley can lift small loads. The force required to lift a single fixed pulley remains the same. They are usually used to lift lighter objects. They can even be attached to buckets used to draw water from wells.
While single fixed pulleys have desirable mechanical advantages, they are not suitable for force multipliers. Because their mechanical advantage diminishes over time, they are not effective force multipliers. They are used to redirect work so that it can be applied in the most convenient direction. This mechanical advantage is the main advantage of fixed pulleys and the most common way of moving objects. They have several benefits, including the ability to increase the speed of moving objects.
Another application for fixed pulleys is lifting supplies. A scaffold can weigh more than 1 and can be directly hoisted. In order to facilitate the transportation of materials, fixed pulleys are usually installed on the top of the scaffolding on construction sites. Then thread the rope through the edge of the groove that holds the pulley. The fixed pulley exerts the same force on the pull side as on the push side. The same is true for moving objects with fixed pulleys.

moving pulley

A movable pulley is a device whose part is fixed to another object, usually a rod or beam. The movable part moves with the load, making the load feel lighter. This is a useful tool for those who need to carry heavy items such as large bags. The advantages of moving pulleys are many. Here are some of them. Read on to learn more about them.
One of the most common uses of movable pulley systems is climbing high objects. Climbers act as pulley loads and pull ropes to lift objects. Eventually, when the traction stops, the climber descends. However, it is still a useful tool in other situations. The movable pulley system can help you climb the tallest objects or lift them to level surfaces.
Another example of movable pulleys is in industry. Depending on the load, movable pulleys make handling and moving loads easier. You can use them in a variety of applications in manufacturing and industry, including cleaning. For example, the American flag is raised and lowered every day. Removable pulleys are a handy tool when buildings need cleaning.
If you’re not sure whether a task requires a pulley, a zipline might be a good option. Connect the 2 ends of the rope and the pulley will move along the rope, then attach the rope to the metal cable. The load is the person holding the pulley, and the force comes from the attachment on the other end of the rope. There are 2 types of live pulleys: simple pulleys with just 1 wheel and live pulleys with many ropes attached.

School flag raised with simple pulleys

How is the school flag raised? It is pulled up by a rope attached to a pulley at the top of the pole. When the rope is pulled, the pulley turns, raising the flag. A pulley is a simple mechanism that helps people move heavier objects with ease. The rope must be securely attached to the pulley to keep the flag stable.
A simple pulley is a spinning wheel with grooves on 1 side and ropes on the other. The rope can be any length and the wheels can be any size. The rope has to go through the groove and the load is attached to the other end of the rope. Simple pulleys are pulleys with fixed shafts. An example is the wheel on a school flagpole.
A simple pulley system consists of a primary pole, a secondary pole and an outer member. The primary flagpole is connected to the track by a detour, while the secondary flagpole is connected to the track by a pipe. There is a groove on 1 side of the track, which passes through the inner cavity of the flagpole. An open track at the upper end of the track connects the 2 parts of the pulley.
A simple pulley can be used for many purposes. This is a useful machine that can be used to raise the flag. Among other things, it can be used in clothing lines, bird feeders, and even roofers. And, of course, you can use the pulley to raise the flag. Its versatility makes it an essential part of school decor.

cast iron pulley

If you are looking for pulleys for your machine, you may come across cast iron pulleys. They are usually cheap and available in a variety of sizes. The rim is held in place by a mesh attached to a central boss. The arms and spokes can be straight or curved, but most are oval. There are many uses for this type of pulley.
You might wonder why the arms of cast iron pulleys are so curved. Bent arms tend to yield rather than break. Cast iron pulleys are usually round with a slight bump on the rim, which helps keep the belt centered on the rim as it moves. On a 300mm diameter pulley, the bumps may be as small as 9mm.